Contracts Finder

Tool Heating System for COMPASS (Composites at Speed and Scale) Facility

University Of Sheffield

Awarded
goods
SME-friendly

This goods tender from University Of Sheffield closed on 2 Apr 2024. It was awarded to ICS Cool Energy Ltd for £615,000 on 18 Apr 2024. The contract end date is 29 Apr 2027. Region: Yorkshire. Procedure: Open procedure (below threshold).

Contracts like this usually come back out to tender before they end.

Live now: tenders like this

Get tenders like this by email

New tenders like this one, in your inbox every morning. Starts with 14 days of Pro, no card needed.

Unsubscribe in one click. See our privacy policy.

Key details

Contracting authority
Region
Yorkshire
Location: Sheffield
Contract value
£600,000ex VAT
Submissions closed
2 April 2024
Published
23 April 2024

Procurement

Contract period
30 April 2024 - 29 April 2027
3 years
Procedure type
Open procedure (below threshold)
CPV classifications

Description

The University of Sheffield wishes to invite tenders for a 'Tool Heating System for COMPASS (Composites at Speed and Scale) Facility' on behalf of the Advanced Manufacturing Research Centre, Castings Group at Catcliffe, South Yorkshire.

The AMRC has recently won HICOMS funding for an 'automated, large scale composites manufacturing centre', including a 'fully automated layup and consolidation cell' which will require a 'Tool Heating System'.

Within the 'Fully Automated Layup and consolidation cell' the 'Tool Heating System' will sit alongside a variety of other equipment, and will be in close proximity to the following:- -High Volume Deposition Cell - including Robot arms and guide rails -Press -Resin Injection Unit -Consolidation Station -Oven Feed table.

Important - Please note it is anticipated that the 'Tool Heating System' will be made up of two shipment batches, with batch 1 (6 individual units) required to be ready for installation and SAT and used with an existing 3m press tool no later than end of May 2024 and batch 2 (8 individual units) ready around March 2025 due to building of the COMPASS facility which is currently under construction and will be used to heat a 10m tool on a Langzauner press which is on order. For the avoidance of doubt, the 14 individual units may be used in various combinations within the new COMPASS facility.

The 'Tool Heating System' is to be used in conjunction with a hydraulic press (already on order from Langzauner (model/type number LZT-OK-2400-SO) and installation/commissioning and acceptance testing is expected to be completed by summer 2025) and an AMRC customer supplied matched die, metallic mould tool for manufacturing research into the production of large polymer composite components using several potential processes, including (but not limited to): - -Resin Transfer Moulding (RTM); -High Pressure Resin Transfer Moulding (HP-RTM) -Gap RTM/ Infusion; -Wet Compression Moulding

It is envisaged that the 'Tool Heating System' will be used with the new Langzauner press, but could be used as standalone units (e.g. connected to a self-clamping mould tool). It will manufacture low volumes of prototype / demonstrator parts for, primarily, the Automotive and Aerospace markets.

In view of this the University is looking for a modular / flexible 'Tool Heating System'.

Tender Process and Documentation: This procurement is an open procedure.

The ITT can be downloaded by registering and expressing your interest on the University`s e-tendering system

If you have any questions or comments in relation to this tender they must be submitted via the In-tend System, this can be accessed at

Completed tenders must be returned through the same e-tendering system.

Closing date for receipt of tenders: Tuesday 2nd April 2024 at 17:00 (UK time).

Additional information: All expressions of interest must be made through The University of Sheffield's e-tendering portal:

This is an open-tender exercise . The ITT can be downloaded by registering and expressing an interest on The University of Sheffield's e-tendering system:-

If you have any questions or comments in relation to this tender they must be submitted by the In-Tend system. This can be accessed at

Completed tenders must be returned through the same e-tendering system.

Closing date for receipt of tenders is - Tuesday 2nd April 2024 at 17:00 (UK time)

Please note: The University of Sheffield is not a contracting authority for the purposes of the Public Contracts Regulations 2015 (Directive 2014/24/EU) as amended by the Public Procurement (Amendment) (EU Exit) Regulations 2020.

The University reserves the right from time to time to voluntarily operate under the Public Contract Regulations (as defined above) on a case by case basis. Otherwise, advertisement of any contract in Find a Tender Service or Contracts Finder is at the sole discretion of the University and is undertaken on a voluntary basis with no implied obligation to comply with the procurement legislation.

For the avoidance of doubt, this procurement is not subject to the Public Contract Regulations (as defined above).

Awarded supplier

Award value
£615,000
Award date
18 April 2024

Contact

Address
The University Of Sheffield, Western Bank, Sheffield, S102TN
Contact name
Jamie Shaw

Identifiers

Buyer reference
3897/COMPASS/TOOL HEATING SYSTEM/JS/24
Notice ID
68096970-5697-46ce-b6ed-4f120f05ed12-743275
OCID
ocds-b5fd17-2bbf8a56-bc08-4492-a1d8-3e7154753084

Explore related tenders

External ID: cf-ocds-b5fd17-2bbf8a56-bc08-4492-a1d8-3e7154753084 • Added 3 October 2026

Get tenders like these by email

Tell us what you do and where you work. Every morning you get the new tenders that fit, from national portals and the buyer portals most services miss.

14 days of Pro, no card. Then Free unless you upgrade.