LAB001LTU Autoclaves for Biomed

The university requires two autoclaves to be used for general laboratory biohazard waste disposal (fluids, plastics, agar plates, etc.). Both autoclaves shall:

• Be fully installed and commissioned by 8th September 2023
• Come with minimum 12-month warranty
• Come with maintenance contract

Main autoclave:

• Minimum sterilisation of 121 degrees for 15 minutes
• Minimum 200 litre capacity
• Plumbed in
• Square chamber
• Pre- and post-vacuum system
• Internal steam generator
• Steam jacket
• Vertical sliding door
• Water softener discard box
• Maximum External Dimensions of machine: Width = 760mm, Height = 1900mm, Depth = 1650mm (including pipework)
• Must fit through doorway entrance (both inner and outer doors): 770mm

Existing on-site services:

• Mains water supply
• 3 phase (63Amp) electrical power
• Drainage

Small autoclave:

• Minimum sterilisation of 121 degrees for 15 minutes
• Minimum 40 litre capacity with electrically heated elements.
• No plumbing requirements.
• Maximum External Dimensions of machine: Width = 600mm, Height = 725mm, Depth = 775mm
• Stand included to hold autoclave at a height of at least 900mm above floor.

The procurement will be conducted exclusively via the university's e-tendering website, where all documentation can be found and downloaded:

https://neupc.delta-esourcing.com/members/leeds-trinity-university/

Accessing a Tender Opportunity via the university's e-tendering website:

Once you have created a supplier profile, to respond to an opportunity, click 'Response Manager' or 'View Invites and Responses'. You will then be presented with a list of all opportunities your organisation has previously worked on and be given the option of viewing current invites or entering the access code to begin responding to a new opportunity

Note:

Project: LAB001LTU Autoclaves for Biomed Opening Date : 06/04/2023 09:00 Closing Date : 02/05/2023 10:00 Access Code : 8429SB7Z35